Product Overview
When used for transportation or daily commuting, the front fork of an electric motorcycle tricycle cannot withstand bumps and is prone to deformation. This not only affects the control but also requires frequent repairs. It is difficult to find the compatible Tricycle Front Fork Clamp or triple tree clamp, and when replacing parts, the structure has to be changed, which is costly and time-consuming. The Ming Diamond Electric Motorcycle Rickshaw Tricycle Front Fork is durable and can precisely match the bike triple tree and motorcycle triple clamps. It is also compatible with the Front Fork Tricycle Clamp. This solves the problem of the front fork for both the owner and the repair shop.
This front fork of Ming Diamond is of a double-tube hydraulic structure. The fork tubes are made of high-strength seamless steel tubes with a wall thickness of 3mm. The bottom Tricycle Front Fork Clamp is made of cast steel and is one-piece molded, providing strong grip and not prone to loosening. The front fork is equipped with the compatible bike triple tree and triple tree clamp, and the installation holes are the same as the original factory specifications, so there is no need to enlarge the holes or add spacers, and it can directly connect to the frame of the electric motorcycle tricycle. It is also compatible with common Motor Bike Triple Clamps. When replacing the front fork of an electric motorcycle, it can also be used. The adaptability is flexible.
Product Features
In terms of parameters, the maximum load capacity of this front fork is 300kg, meeting the load requirements of the electric motorcycle tricycle. The hydraulic damping can be adjusted between 0 and 5 levels, allowing the shock absorption effect to be reduced according to the road conditions, and it can also run smoothly on bumpy roads. The Tricycle Front Fork Clamp has a bolt hole distance accuracy of ±0.1mm, and the gap between the fork tube and the clamp is less than 0.05mm, so it will not loosen or make abnormal sounds. The bike triple tree has a steering angle of ±35°, providing flexible steering without any jamming. The fork tube of the front fork is electroplated, and it does not rust even after 480 hours of salt spray tests, and can be used in rainy or humid environments for a long time.
This front fork of Ming Diamond is highly durable. The seamless steel tube fork tube is impact-resistant, the hydraulic structure is not prone to oil leakage, and its lifespan is twice longer than that of ordinary front forks. It is not prone to deformation even on bumpy roads. It has a wide range of adaptability, and can be matched with Tricycle Front Fork Clamp, bike triple tree, and Motor Bike Triple Clamps. It can be used for both electric motorcycles and electric tricycles. There is no need to search for parts for different models. The adjustable hydraulic damping can cope with different road conditions. It can reduce shock absorption when passing over speed bumps or potholes, reducing the rider's feeling of bumps. Installation is also convenient. The hole positions are the same as the original factory, and it can be installed by a repair shop technician in half an hour without additional processing.
For owners of electric tricycles for local delivery, who drive through the streets and alleys every day and encounter many bumps, using this front fork can reduce the frequency of damage, avoiding downtime for repairs, and ensuring delivery efficiency. In rural areas, electric motorcycle tricycles often travel on dirt roads and gravel roads. The Tricycle Front Fork Clamp has strong grip, the fork tube is durable, and it can handle complex road conditions, avoiding front fork failures that would delay farm work. Electric motorcycle repair shops should have this front fork in stock. When repairing electric motorcycles or tricycles, they can find the compatible bike triple tree or Motor Bike Triple Clamps, eliminating the need to stockpile multiple models and reducing inventory pressure. The manufacturer of electric tricycles regards it as an original part, which can enhance the durability of the entire vehicle and increase the competitiveness of the product.
By choosing the Ming Diamond front fork, the customer's maintenance costs have decreased, the durability has improved, and the replacement frequency has reduced. They save hundreds of dollars on spare parts in a year. It is widely compatible and does not require searching for parts. It can be used for both electric tricycles and electric motorcycles, saving time spent on searching for parts. The adjustable shock absorption reduces the jarring sensation and makes long rides less tiring. The installation at the repair shop is fast, and they can repair 2-3 vehicles in a day, increasing income.
Customer reviews
Driver Zhang said, "The previous front fork would deform after running for half a year. After replacing it with the Ming Diamond model, it lasted for more than a year. It can handle the bumpy roads for dozens of kilometers every day, and the control is also stable, which is very reassuring." The owner of the electric motorcycle repair shop Li commented, "This front fork has a wide compatibility. It can be installed with Tricycle Front Fork Clamp or bike triple tree. Customers' feedback after repair is good. The store only stocks this brand." Rural user Wang said, "The roads in the village are not good. Before, the front fork often broke. After replacing it with this one, it works fine on dirt roads and gravel roads. The Tricycle Clamp Of Front Fork is also sturdy. The villagers all followed suit and replaced theirs."
