The traditional front fork clamps of tricycles are prone to fracture and deformation, leading to the risk of losing control of the direction. Our developed high-strength Tricycle Clamp Of Front Fork uses a forging process and has undergone 100,000 fatigue tests without any deformation. Practical use shows that the steering accuracy has improved by 40%, and it is particularly suitable for freight tricycles, elderly mobility vehicles, etc., and perfectly matches various bike triple tree systems.
Core Features
Thickened saddle design, with a wall thickness 2mm greater than standard parts
Carburizing treatment surface, with rust protection reaching IPX5 level
Six-point positioning system, ensuring precise alignment of Motor Bike Triple Clamps
Supports various pipe diameters ranging from 25 to 35mm for adaptation
Maintenance Suggestions
Check the torque value of the fixing bolts every quarter
Regularly clean the sand and mud in the clamping area
Avoid using impact tools for installation
Store in a dry environment
Frequently Asked Questions Answered
Question: Are professional tools required for installation?
Answer: With the dedicated positioning fixtures provided, the installation can be completed using just an ordinary wrench, and it is compatible with most triple tree clamp systems.
Question: What is the maximum load capacity?
Answer: Static load capacity is 200kg, dynamic load capacity is 80kg, exceeding the national standard by 50%.
Question: Is it rust-proof?
Answer: It undergoes triple rust-proof treatment, and the salt spray test lasts for over 200 hours.
Question: Which vehicle models does it fit?
Answer: It supports mainstream brand electric tricycles and can be customized for special specifications.
Question: What is the after-sales policy?
Answer: A 36-month warranty is provided, and if the product breaks, it will be replaced without conditions.
After a certain courier station was replaced, the failure rate of the direction system decreased by 75%. Please note: It is recommended to use a torque wrench during installation to ensure that the bolts are tightened to 25N·m. Existing users have reported that they have used it on mountainous roads for two years without any deformation, which verifies the durability of the product. All products undergo magnetic particle flaw detection before leaving the factory, and the internal defect rate is controlled below 0.2%.
